RealSpeak Solo and Eloquence Languages for PAC Mate Omni

Use this page to download one or more Nuance® RealSpeak™ Solo voices or Eloquence languages that work exclusively with PAC Mate Omni™ BX and QX units. To use any of the RealSpeak voices, you must be running PAC Mate Omni release 6.5 or later. The Eloquence language modules can be installed on any version of PAC Mate Omni as well as older PAC Mates running a release no earlier than 2.5.

These voices are available at no charge. The RealSpeak Solo voices can be installed into main memory or on a CompactFlash® card. If you intend to install more than one voice, it is recommended that you install them onto a CompactFlash card, as each voice requires at least 10 megabytes of storage space. Additional Eloquence languages are always installed to main memory, and each language will occupy between 1.5 and 2 MB of space. Once a voice is installed, you can open the Voice Settings dialog box, move to the Secondary page, and configure it as your secondary voice, which is active when you use INSERT+S, L on the QX or S CHORD, L on the BX to toggle between the primary and secondary voice. For more information on configuring the secondary voice, refer to the PAC Mate Omni documentation.

RealSpeak Solo Voices

You can choose to download each voice as either an EXE or CAB installer. Select the EXE file to install the voice onto the PAC Mate Omni from your computer using ActiveSync or Windows Mobile Device Center. Choose the CAB file to perform the installation directly from the PAC Mate Omni.

To install a voice using the EXE installer, do the following:

Locate the voice you want and choose the link to download the EXE file. Save the downloaded file in a location on your computer you can easily remember, such as the Desktop.
Establish a Standard or Guest connection between your PAC Mate and computer using Active Sync or Windows Mobile Device Center.
Locate the downloaded file and press ENTER. This will begin the installation process. Follow the prompts.
After installation has completed, press ENTER on the QX or DOT 8 on the BX when prompted to perform a warm reset.

To install a voice using the CAB file, do the following:

Locate the voice you want and choose the link to download the CAB file.
Transfer the CAB file to a location on your PAC Mate Omni. You can run the file from main memory or a CompactFlash card.
Use File Explorer to locate the CAB file and press ENTER on the QX or DOT 8 on the BX to begin the installation, then follow the prompts.
Once the installation completes, press ENTER on the QX or DOT 8 on the BX when prompted to perform a warm reset.

Important: Once you have installed a RealSpeak Solo voice onto a CompactFlash card, you must continue using the same card when installing additional voices. You will also not be able to uninstall a voice unless the orriginal card containing the voice is inserted.

Please note that Nuance RealSpeak Solo voices do not support pitch change like the Eloquence synthesizer.

English

Australian

British

United States

Czech

Danish

Dutch

Flemish

Greek

Norwegian

Polish

Russian

Turkish

Additional Eloquence Languages

Eloquence languages can be installed on PAC Mate or PAC Mate Omni. To add a language, do the following:

Download the language you want by selecting one of the links below. Save the downloaded file in a location on your computer you can easily remember, such as the Desktop.
Establish a Standard or Guest connection between your PAC Mate and computer using Active Sync or Windows Mobile Device Center.
Locate the downloaded file and press ENTER. This will begin the installation process. Follow the prompts.
After installation has completed, press CTRL+ALT+DELETE on the QX or DOTS 1-2-3-4-6-7-8 CHORD on the BX when prompted to perform a warm reset.